Protective corners protecting the edges for the strapping tape
Wainvest Europe offers protective corners for the edges for strapping tape. Depending on the customer's needs, the corners on the contact surfaces with the product can be flat or with a positioning pin. When the product or its packaging is packed, it is often easier for the warehouse keeper to first "anchor" the corner in the product or its packaging (eg cardboard) in the desired position and only then use the strapping tape.
The difference in the comfort of work can be especially noticed when strapping bulky products, especially when securing the bottom edges of the product. The special design of the corners causes that the corner "tightens" on the edge and maintains the desired position during further work of the warehouse keeper when he wraps the product with a tape. The design of the corner prevents it from falling out during any accidental shifting of the strap during the strapping operation.
Benefits of using protective corners under the strapping tape:
- lower costs in relation to the costs of handling complaints
- distribution of the belt tension over a larger area in a way that does not damage the product or its packaging
- increasing the belt tension force, which improves the stability of the load and the safety of people and the product during warehouse, storage and transport operations
- increasing the comfort of the warehouse worker while reducing the time needed
plastic corner without pin: height 24mm, width 35mm
plastic corner without pin: height 30mm, width 50mm
plastic corner without pin: height 30mm, width 45mm
plastic corner without pin: height 35mm, width 50mm
plastic corner without pin: height 41mm, width 41mm
plastic corner without a pin with a hole for the tape: height 41mm, width 41mm
plastic corner without pin: height 50mm, width 70mm
plastic corner with a pin: height 41mm, width 41mm
plastic corner with a pin: height 35mm, width 50mm
plastic corner with a pin: height 35mm, width 150mm
Protective corners to protect the edges
Wainvest Europe offers plastic corners protecting the edges and corners sensitive to mechanical damage such as abrasions, fractures and cracks. This type of protection is especially recommended for products that will have a visual function in their final application. They must be aesthetic and without damage so that the customer does not advertise the delivered product. Practice shows that it is better to take care of the safety of the product in advance at the stage of planning the packaging method than to bear the costs of handling the complaint later, i.e. time spent, finances and loss of image towards customers.
Benefits of using protective corners:
- lower costs in relation to the costs of handling complaints
- shortening the time of warehouse operations and the risk of accidental damage
- customer satisfaction with proper product protection when part of the product movement operation is also performed on the customer's side
- reduction of financial losses resulting from the disposal of damaged products
closed corner: height 28mm width 100mm
closed corner: height 22mm width 40mm
closed corner: height 60mm width 100mm
open corner: height 28mm width 70mm
